Subscribe to Jergens News

Stainless Steel Ball Lock® Shanks

Any Ball Lock application requires at least two sets of shanks, receiver bushings and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than two shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.

  • Material: 17-4 PH Stainless Steel
  • Heat Treat: Rc 40-45
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part NumberFixture Plate Thickness +/- 0.005Shank Diameter (mm) AHead of Shank Height BHead of Shank Diameter CLength Under Head DMaximum Hold-Down Force (lbs)Recommended Screw Torque (Ft/lb)Hex Wrench Size for Set ScrewShank Repair Kit Part Number
49601SS CAD
0.750200.381.751.53300031/849901SS
49602SS CAD
1.000200.381.751.78300031/849902SS
49605SS CAD
0.500130.250.871.0875013/3249905SS
49606SS CAD
0.750130.250.871.3375013/3349906SS
49607SS CAD
0.500160.321.501.15120021/849907SS
49608SS CAD
0.750160.321.501.40120021/849908SS
49611SS CAD
0.750250.382.001.70700075/3249911SS
49612SS CAD
1.000250.382.001.95700075/3349912SS
49621SS CAD
0.750300.502.251.8810000123/1649921SS
49622SS CAD
1.000300.502.252.1310000123/1749922SS
49631SS CAD
0.750350.502.251.9715500191/449931SS
49632SS CAD
1.000350.502.252.2215500191/449932SS
49633SS CAD
1.500350.502.252.7215500191/449933SS
49634SS CAD
2.000350.502.253.2215500191/449934SS
49641SS CAD
0.750500.753.002.4520000383/849941SS
49642SS CAD
1.000500.753.002.7020000383/849942SS
49643SS CAD
1.500500.753.003.2020000383/849943SS
49644SS CAD
2.000500.753.003.7020000383/849944SS


Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).